HP LaserJet 2100 Fuser Assembly
| REF | DESCRIPTION | |
|---|---|---|
| Grounding plate - On end of delivery roller | ||
| Fusing Roller Assembly (For 100V to 127V operation) - Bonds the toner to the paper with heat | ||
| Fusing Roller Assembly (For 220V operation) - Bonds the toner to the paper with heat | ||
| Support bushing - Pressure Roller Support Bushing - Two used | ||
| Entrance guide - Paper input guide to fusing assembly | ||
| Pressure plate - Covers top of fusing roller | ||
| Roller bushing - Right side delivery roller support bushing | ||
| Pressure roller - Applies pressure to paper as it feeds through the fusing roller | ||
| Delivery roller - Feeds paper out of fusing assembly | ||
| Upper delivery roller drive gear - 14 tooth - 14 tooth gear - Drives delivery roller - Attaches to lower delivery guide | ||
| Delivery roller gear - 15 tooth - 15 tooth gear - Attaches to end of delivery roller | ||
| Pressure roller gear - 26 tooth - 26 tooth gear - Attaches to end of pressure roller | ||
| Compression spring - Between fusing roller and pressure plate above fusing roller - Two used | ||
| Roller bushing - Left side delivery roller support bushing | ||
| Delivery roller guide - Supports delivery roller | ||
| Contact holder - Anchors fusing assembly to chassis | ||
| Sensor PC board - Small board with flag activated photosensor - Photosensor (PS2001) - Tray 3 paper sensor | ||
| Fusing roller assembly (For 100V to 120V operation) - Includes heating element and fixing film sleeve | ||
| Fusing roller assembly (For 220V to 240V operation) - Includes heating element and fixing sleeve | ||
| Compression spring - Provides tension for upper delivery rollers mounted on upper delivery guide - 4 used | ||
| Delivery roller - Roller for upper delivery guide - Four used | ||
| Upper delivery guide - Has four separate rollers and springs | ||
| Paper sensor lever - Actuates PS503 Paper Sensor | ||
| Torsion spring - Provides tension for paper sensor lever |
505-203-3798