Home

HP LaserJet 2430 Internal Components (1 of 4)


REF PART # DESCRIPTION
1 RM1-1521 Laser/Scanner assembly - Mounts on top of print structure
2 RC1-4128 Plastic duct that vents air from the lower right front fan to the laser/scanner.
3 RU5-2404 Compression spring - Spring provides pressure to the laser shutter which when pulled back (spring is compressed) enables the laser scanner shutter by pressing up the plastic mechanical link on the underside of the laser/scanner assembly
4 RC1-4125 Laser shutter link - Enables the laser scanner shutter by pressing up this link on the underside of the laser/scanner assembly
5 RC1-4129 Small vent duct to route air from the fan (FM2) to the cartridge area
6 XB2-7300 Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal
7 RC1-4121 Left upper toner cartridge guide
8 RC1-4123 Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge
9 RC1-3949 Left middle guide - Small black plastic cassette guide on left side of printer
10 RC1-4138 Cartridge lever - Link that pushes contact cam and protective plate when cartridge is inserted
11 RC1-4122 Left lower toner cartridge guide
12 RC1-3948 Left front guide - Small black plastic piece on front left side of chassis in Tray 2 cassette guide slot
13 RA0-1003 Rubber foot - For bottom of printer - Three used
14 RC1-3946 Front base plate - Metal plate that fits under fuser assembly
15 RC1-4055 Door arm - White plastic arm that connects to left side cartridge access door
16 RU5-2407 Tension spring - Provides tension for cartridge access door arm
17 RC1-4056 Door arm guide - White plastic guide for cartridge door lever
18 RC1-4060 Grounding contact - Tiny U-shaped metal cartridge grounding contact - Contacts copper grounding strip on left side of toner cartridge
19 RC1-4061 Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Front cartridge contact spring
20 RC1-4065 Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed
21 RC1-4066 Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge
22 RC1-4067 Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge
23 RC1-4140 Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed
24 RU5-2410 Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed
25 RU5-2403 Tension spring - Provides tension for cartridge clamp lever that holds lefts side of cartridge in a stable position when inserted
26 RG5-1928 Connector (3-pin)
27 RC1-4136 Protective plate
28 RC1-4137 Contact cam - Vertical piece that inserts into protective plate
29 RK2-0573 Cooling fan - Fan FM2 - Located on lower left side of printer
30 RC1-4134 Fan holder - FM2 fan holder housing
31 WT2-5694 Snap-in cable clamp
32 RC1-4009 Plate holder - Holds the left rear corner of the paper access plate (duplex pan)
33 RC1-3950 Cassette guide - Rear left black plastic paper cassette guide
34 RC1-3951 Cassette guide - Right front side black plastic paper cassette guide
35 RC1-3953 Cassette guide - Right rear black plastic paper cassette guide
36 RC1-4126 Reader holder cover - Plastic housing that covers cartridge E-label reader and holder assembly
37 RU5-2405 Compression spring - Provides pressure for E-reader holder
38 RC1-4127 Reader holder - E-label reader holder - Housing that holds cartridge E-label reader
39 RM1-1422 Reader and cable - E-label reader contact mechanism - Connection to read data from toner catrtridge - Includes cable
40 RM1-1516 Engine controller assembly - Engine controller PC board and metal pan - 110/127 VAC
RM1-1524 Engine controller assembly - Engine controller PC board and metal pan - 220/240 VAC