Home

HP LaserJet P3005 Printer Internal Components (5 of 6)


 

 


REF PART # DESCRIPTION
1 RC2-0627 Formatter cover - Mounts on the left back side of the printer
2 RC2-0628 Anti-magnetic plate - Located on the formatter cover
3 RC2-0592 Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer
4 RC1-4083 Paper guide - Located under the registration roller assembly
5 RM1-3730 Engine controller assembly - Engine controller PC board and metal pan - 110VAC/127VAC
RM1-3731 Engine controller assembly - Engine controller PC board and metal pan - 220VAC/240VAC
6 RM1-3712 Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly
7 RM1-3740 Fusing assembly - For 110-127 VAC - Bonds toner to paper by heat
RM1-3741 Fusing assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat
8 RM1-3762 Paper pick-up assembly - Includes the pickup roller, feed roller assembly, drive gears, and plastic housing
9 XA9-1671 Screw - M3 X 8mm long
10 RM1-3714 Gear - Pick up roller gear assembly
11 RM1-1485 Roller assembly - Black plastic housing that holds rollers in front of tray 2 pickup roller assembly
12 RC1-3939 Paper sensor lever - Mechanical device that activates photo sensor (PS902) - For tray 1
13 WT2-5694 Snap-in cable clamp
14 RC2-0588 Cable holder - Mounts on the main drive assembly
15 XA9-1503 M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
16 RM1-4041 Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3)
17 WT2-5678 Cable clip - White plastic push-in clip with mounting pin
18 XB4-7401 M4 pan-head phillips screw with self-tapping threads - 10mm long
19 RK2-1490 Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly
20 RU5-2386 Torsion spring - Provides tension for tray 1 paper sensor flag
21 RC2-0638 I/O face plate - Mounts on the formatter board cover (non-network models)
22 RC2-0593 Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction
23 RK2-1497 Cooling fan - Located on the right side of the printer
24 XB2-7300 Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal