| REF |
PART # |
DESCRIPTION |
| 1 |
RC1-4115 |
Coupling lever - White plastic lever between large white gear cam and drive release assembly |
| 2 |
RC2-0590 |
Cartridge duct - Small vent duct to route air from the fan (FM1) to the cartridge area |
| 3 |
RM1-1522 |
Drive release assembly |
| 4 |
RC2-0648 |
Air guide - Located next to the cartridge duct |
| 5 |
RC2-0579 |
Gear cover - Mounts on the left side of the printer chassis |
| 6 |
RM1-3746 |
Fuser drive side plate and gear assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer |
| 7 |
RU5-0950 |
Gear - 201-tooth gear |
| 8 |
RU5-0956 |
Gear - 20/20 tooth - Goes on the fuser drive assembly |
| 9 |
RU5-0957 |
Gear - 20-tooth - Goes on the fuser drive assembly |
| 10 |
RU5-0958 |
Gear - 17/17 tooth - Goes on the fuser drive assembly |
| 11 |
RU5-0959 |
Gear - 19-tooth - Goes on the fuser drive assembly |
| 12 |
RU5-2401 |
Compression spring - Provides pressure for the large 201-tooth white gear on right side of printer |
| 13 |
RU5-0394 |
Gear - 12-tooth Gear - Goes on the drive release assembly |
| 14 |
RU5-2920 |
Compression spring - Goes on the pendulum assembly |
| 15 |
XD9-0232 |
E-ring keeper - Attaches to drive end of registration roller to secure cluster gear |
| 16 |
RC1-4114 |
Cam - Located between large white 201-tooth gear and drive release lever |
| 17 |
XA9-1671 |
Screw - M3 X 8mm long |
| 18 |
XD3-2120 |
Dowel pin - Holds roller/cam pieces on roller dowel |
| 19 |
XD2-1200 |
E-Ring |
| 20 |
WE8-5516 |
Ferrite Core |
| 21 |
RC2-0657 |
Fuser thrust stopper - Located on the fuser drive assembly |
| 22 |
RC2-0701 |
Inner bushing - Rides on the large white 201-tooth drive gear |
| 23 |
RK2-1489 |
Stepping DC motor (M2) - Drives all fuser rollers and fuser drive assembly |
| 24 |
RC1-4108 |
Cover for main motor M1 - Located on lower right side of printer |
| 25 |
RC2-0652 |
Plain Washer - Located on the pendulum assembly |
| 26 |
RK2-1488 |
Main motor (M1) - DC motor located on the upper left side of the printer |
| 27 |
RC1-4116 |
Drive release lever |
| 28 |
RU5-0951 |
Gear - 16-tooth gear |
| 29 |
RU5-0955 |
Gear - 42-tooth - Goes with the pendulum assembly |
| 30 |
RU5-0960 |
Gear - 31-tooth gear |
| 31 |
RU5-0962 |
Gear - 65-tooth gear |
| 32 |
XD9-0232 |
E-ring keeper - Attaches to drive end of registration roller to secure cluster gear |
| 33 |
XB4-7401 |
M4 pan-head phillips screw with self-tapping threads - 10mm long |
| 34 |
RC1-4117 |
Drive release link |
| 35 |
RC2-0649 |
Fuser film drive side plate - Located on the fuser assembly |
| 36 |
RM1-3748 |
Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability |
505-203-3798