Home

HP LaserJet P3005 Printer Internal Components (1 of 6)

REF PART # DESCRIPTION
1 RM1-1521 Laser/Scanner assembly - Mounts on top of print structure
2 RC2-0622 Fan holder - Chassis left fan holder
3 RC1-4009 Plate holder - Holds the left rear corner of the paper access plate (duplex pan)
4 RC2-0566 Cassette guide - Left rear side cassette guide
5 RC2-0567 Center guide - Left center guide plate
6 RC2-0703 Cartridge guide - Upper left side toner cartridge guide
7 RC2-0704 Cartridge guide - Lower left side toner cartridge guide
8 RU5-2405 Compression spring - Provides pressure for E-reader holder
9 WT2-5812 Cable clip - 'C' shaped white plastic clip
10 RC2-0706 Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge
11 RC1-4128 Plastic duct that vents air from the lower right front fan to the laser/scanner.
12 RC2-0707 Left cartridge stopper - Provided a predetermined position for the cartridge
13 XA9-1671 Screw - M3 X 8mm long
14 RU5-2403 Tension spring - Provides tension for cartridge clamp lever that holds lefts side of cartridge in a stable position when inserted
15 RU5-2410 Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed
16 VS1-7257 Drawer connector - Connector located on top of tray assembly frame (right side), which connects tray assemblies to each other
17 WT2-5694 Snap-in cable clamp
18 RC1-4055 Door arm - White plastic arm that connects to left side cartridge access door
19 RU5-2407 Tension spring - Provides tension for cartridge access door arm
20 RC1-4125 Laser shutter link - Enables the laser scanner shutter by pressing up this link on the underside of the laser/scanner assembly
21 RC1-4126 Reader holder cover - Plastic housing that covers cartridge E-label reader and holder assembly
22 RC1-4127 E-label reader holder - Housing that holds cartridge E-label reader
23 RU5-2404 Compression spring - Spring provides pressure to the laser shutter which when pulled back (spring is compressed) enables the laser scanner shutter by pressing up the plastic mechanical link on the underside of the laser/scanner assembly
24 RM1-4053 Laser scanner motor cable - Connects ECU to scanner motor (M3)
25 RM1-4054 Contacts and cable - For toner cartridge memory tag - Connects to ECU memory control
26 RC2-0623 Left plate fan shield
27 RK2-1499 Cooling fan - Located on the left side of the printer - Small fan that cools the fuser assembly and print cartridge area
28 RA0-1003 Rubber foot - For bottom of printer - Three used
29 RC1-4056 Door arm guide - White plastic guide for cartridge door lever
30 RC1-4065 Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed
31 RC1-4066 Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge
32 RC1-4067 Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge
33 RC1-4136 Protective plate
34 RC1-4137 Contact cam - Vertical piece that inserts into protective plate
35 RC1-4140 Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed
36 RC2-0565 Cassette guide - Left side guide for media cassette
37 RC2-0585 Left wing feed guide stopper
38 RC2-0705 Drive release lever