Home

HP LaserJet 4250 Internal Components (2 of 3)

REF PART # DESCRIPTION
1 RC1-0268 Metal rod between external power button and switch on power supply board
2 RC1-0340 Scanner cable guide - Mounts below accessory interface connector cable on right side of chassis
3 RC1-0273 Paper feed belt guide for left side
4 RU5-0045 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly
5 RL1-0264 Gear - Gear with attached shaft - Driven by pickup drive assembly on right front of printer
6 WG8-5624 Photo-sensor (TLP1241) - Sensor flag activated
7 RU5-0040 Gear - 23 tooth gear in lower front section of pickup drive assembly
8 RC1-0206 Bushing - On right side of paper pickup drive assembly
9 RM1-1067 Laser/scanner assembly for 4250/4350 series LaserJet printers
10 RC1-0264 Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft.
11 RM1-1198 Laser cable - Connects between DC Controller board and laser scanner unit - J145 to J83
12 XA9-1500 M3 pan-head Phillips screw with flat washer - 8mm long
13 RK2-0269 Paper pickup solenoid
14 RM1-0036 Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side
15 RM1-0037 Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
16 RC1-0208 Paper sensor flag holder
17 RC1-0243 Right front power supply guide - Attaches to right side of printer chassis
18 RC1-3352 Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly
19 RC1-0212 Paper pickup arm holder - Holder for pickup roller shaft
20 RC1-0371 23 Gear - Gear that drives paper feed roller - Attaches to feed roller shaft
21 RL1-0013 Swing plate - Pivot mount for pickup roller shaft
22 RC1-0213 Compression spring - Provides pressure for paper pickup and feed rollers in Tray 2 pickup assembly
23 RC1-0153 Right side Tray 2 paper cassette guide
24 RC1-0330 Solenoid damper - Locate on right side of Tray 2 guide - Works with kicker to dampen Tray 2 pickup solenoid on right side of tray guide
25 RM1-1192 Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector
26 RL1-0015 Kicker assembly - Mounts to right side of the printer and is connected to the right side guide - Senses when the paper cassette is inserted into the printer
27 RM1-0041 Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly
28 RB1-8107 Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
29 RC1-0242 Inner right side edge guard - Small plastic guard that protects wires inside chassis on right side of printer.
30 RC1-0244 Support guide - Supports right rear side of power supply board
31 RC1-0247 Right side edge guard - Small plastic guard that protects wires - Mounts on right outer side of printer chassis.
32 XA9-1503 M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
33 RM1-0042 Accessory cable/connector - Connector for stacker and stacker/stapler accessory at top right rear of printer
34 RM1-0043 Swing plate assembly - For Tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply.
35 RM1-1189 Top bin full sensor cable
36 RM1-1193 Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector
37 RC1-0254 Torsion spring - Provides tension for Tray 2 kicker - Mounts on Tray 2 guide assembly
38 RC1-1923 Torsion spring - Provides tension for paper sensor flag
39 WG8-5624 Photo-sensor (TLP1241) - Sensor flag activated
40 RM1-0034 Paper pickup assembly - Paper pickup drive assembly for Tray 1/Multipurpose input tray