| REF |
PART # |
DESCRIPTION |
| 1 |
RC1-0061 |
Torsion spring |
| 2 |
RM1-1110 |
Transfer roller assembly - Long black spongy roller - Transfers charge to paper |
| 3 |
RC1-0269 |
DC Controller flat cable guide |
| 4 |
RC1-0270 |
DC Controller board cable guide |
| 5 |
RK2-0274 |
Toner cartridge motor - Motor on front right side of printer (M102) |
| 6 |
RK2-0272 |
Main motor - M101 |
| 7 |
XD9-0232 |
E-ring keeper - Attaches to drive end of registration roller to secure cluster gear |
| 8 |
RU5-0015 |
14T/30T cluster gear - Attaches to drive end of registration roller |
| 9 |
XA9-1500 |
M3 pan-head Phillips screw with flat washer - 8mm long |
| 10 |
XA9-1503 |
M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long |
| 11 |
RC1-0060 |
Paper feed sensor flag for Tray 1 |
| 12 |
RC1-3339 |
Fan rod - Metal rod that mounts against Fan 2 on right side of printer - Used for noise reduction of Fan 2 |
| 13 |
RC1-3340 |
DC Controller board cable guide |
| 14 |
RM1-0012 |
Paper feed roller assembly |
| 15 |
RM1-1066 |
Main drive assembly - Main gear assembly on right side of printer |
| 16 |
RM1-1098 |
Registration roller assembly |
| 17 |
RM1-1070 |
Power supply assembly - For LaserJet 4240/4250/4350 - For 110V to 127VAC operation |
| RM1-1071 |
Power supply assembly - For LaserJet 4240/4250/4350 - For 220V to 240VAC operation |
505-203-3798